Synthese und Struktur von Ruthenium(II)‐Komplexen mit Triazenido‐ und Pentaazadienido‐Liganden

Synthesis and Crystal Structure of Ruthenium(II) Complexes with Triazenido and Pentaazadienido Ligands The ruthenium(II) triazenido complex [RuCl(ClC₆H₄N₃C₆H₄Cl)(p‐cymene)] ( 1 ) is obtained by the reaction of silver bis(p‐chlorphenyl)triazenid with [RuCl₂(p‐cymene)]₂ in CH₂Cl₂, and forms air stable, orange yellow crystals. It crystallizes as 1 ·CH₂Cl₂ in the orthorhombic space group Pbca with the lattice parameters a = 3134.3(3), b = 2105.7(2), c = 769.15(4) pm and Z = 8. In the diamagnetic mononuclear complex 1 the chelating triazenido ligand coordinates with the atoms N(1) and N(3). p‐Cymene binds η⁶ with its C₆ ring. The reaction of the etherphosphane complex [RuCl₂(Ph₂PCH₂C₄H₇O₂)₂] with 1, 3‐bis(p‐tolyl)triazenid in THF yields the complex [RuCl(tolyl‐N₃‐tolyl)(Ph₂PCH₂C₄H₇O₂)₂] ( 2 ). 2 forms monoclinic, red crystals with the space group P2₁/c and a = 1521.0(2), b = 1451.8(2), c = 2073.7(2) pm, β = 99.29(1)° and Z = 4. It is air stable and diamagnetic. The triazenide ion coordinates with the atoms N(1) and N(3). One of the two etherphosphane ligands is chelating and coordinates with the P atom and one O atom, while the other ligand binds in a monodentate fashion with its P atom, resulting in a coordination number of six for the Ru^II. [Ag(tolyl‐N₅‐tolyl)]₂ reacts in THF with [RuCl₂(C₆H₆)]₂ to afford the air stable, diamagnetic pentaazadienido complex [RuCl(tolyl‐N₅‐tolyl)(C₆H₆)] ( 3 ). 3 forms monoclinic, red crystals with the space group P2₁/c and a = 1462.4(1), b = 1056.51(8), c = 1371.4(1) pm, β = 114.36(1)° and Z = 4. The chelating pentaazadienido ligand coordinates with the atoms N(1) and N(3) at the divalent Ru atom. The benzene molecule binds η⁶ with its π system.     

Comparison of metal analysis in sediments using EDXRF and ICP-OES with the HCl and Tessie extraction methods

The work presents an investigation on metal availability in sediments during 13 months using the dispersive-energy X-ray fluorescence (EDXRF) and atomic emission spectrometry with induced argon plasma (ICP-OES) techniques and single extraction (0.1 mol l⁻¹ HCl) and Tessie’s sequential speciation methods. The EDXRF technique could yield essentially the same profile as ICP-OES for the seasonal variation of metals in sediments, but in a more practical way. The sequential extraction procedure (SEP) was more efficient in metal dissolution than single extraction. The Pb, Ni, Al, Cr, and Fe elements were less efficiently extracted with single extraction in relation to sequential extraction. For Co both methodologies were equivalent, but for Cu and Mn the extraction was higher with single extraction. Single extraction does not mobilize Pb, Ni, Al, Cr, and Fe adsorbed on oxides and bound to organic matter. However for Cu and Mn, not only extracted these metals from the four fractions, but it also dissolved part of the fifth fraction (residual). Principal Component Analysis discriminated seasonal variations in the content of several metals, mainly Fe, Co, Ni, and Zn. The mobility of metallic ions in the sediments is conditioned to the seasonal flow of organic and inorganic material coming from the river or by the erosion of adjacent soils.     

Factors affecting the lability of the σ(M-X) bond in cycloplatinated and cyclopalladated complexes containing [C(sp, ferrocene),N,X] or [C(sp, phenyl),N,X] (X = S, N) terdentate ligands

The reactions of the cyclometallated complexes [M{[(η⁵-C₅H₃)-CHN-(C₆H₄-2-SMe)]Fe(η⁵-C₅H₅)}Cl] [with M = Pt (5a) or Pd (5b)] with PPh₃ under different experimental conditions are reported. These studies have allowed the isolation of [M{[(η⁵-C₅H₃)-CHN-C₆H₄-2-SMe]Fe(η⁵-C₅H₅)}(PPh₃)]X [M = Pt and X⁻ = Cl⁻ (6a) or (7a) or M = Pd and X⁻ = Cl⁻ (6b) or (7b)] and the neutral complex [Pd{[(η⁵-C₅H₃)-CHN-(C₆H₄-2-SMe)]Fe(η⁵-C₅H₅)}Cl(PPh₃)] (8b). In 6-7a,b the ferrocenyl Schiff base behaves as a [C(sp², ferrocene),N,S]⁻ group while in 8b it acts as a [C(sp², ferrocene),N]⁻ ligand. The X-ray crystal structure of 7b confirms the mode of binding of the ferrocenyl ligand. The comparison of the results obtained and those reported for [M{(C₆H₄)-CHN-(CH₂-CH₂-2-SEt)}Cl] and [M{(C₆H₄)-CHN-(C₆H₄-2-SMe)}Cl] {with a [C(sp², phenyl),N,S]⁻ terdentate ligand} or [M{[(η⁵-C₅H₃)-CHN-(CH₂)₃-NMe₂]Fe(η⁵-C₅H₅)}Cl] {in which the ligand acts as a [C(sp², ferrocene),N,N′]⁻ group} have allowed the elucidation of the relative importance of the factors affecting the lability of the M-X (X = S or N′) and M-Cl bonds in cyclometallated compounds with [C,N,S]⁻ and [C(sp², ferrocene),N,X]⁻ ligands.     

Trifluoromethanesulfenyl acetate, CF3S-OC(O)CH3, and trifluoromethanesulfenyl trifluoroacetate, CF3S-OC(O)CF3: unexpected conformational properties

Structural and conformational properties of two sulfenyl derivatives, trifluoromethanesulfenyl acetate, CF3S-OC(O)CH3 (1), and trifluoromethanesulfenyl trifluoroacetate, CF3S-OC(O)CF3 (2), were determined by gas electron diffraction, vibrational spectroscopy, in particular with IR (matrix) spectroscopy, which includes photochemical studies, and by quantum chemical calculations. Both compounds exist in the gas phase as a mixture of two conformers, with the prevailing component possessing a gauche structure around the S-O bond. The minor form, 15(5)% in 1 and 11(5)% in 2 according to IR(matrix) spectra, possesses an unexpected trans structure around the S-O bond. The C=O bond of the acetyl group is oriented syn with respect to the S-O bond in both conformers. UV-visible broad band irradiation of 1 and 2 isolated in inert gas matrixes causes various changes to occur. Conformational randomization clearly takes place in 2 with simultaneous formation of CF3SCF3. For 1 the only reaction channel detected leads to the formation of CH3SCF3 with the consequent extrusion of CO2. Quantum chemical calculations (B3LYP/6-31G and MP2 with 6-31G and 6-311G(2df,pd) basis sets) confirm the existence of a stable trans conformer. The calculations reproduce the conformational properties for both compounds qualitatively correct with the exception of the B3LYP method for compound 2 which predicts the trans form to be prevailing, in contrast to the experiment.     

Application of solid phase microextraction for the determination of soil fumigants in water and soil samples

The potential of solid phase microextraction (SPME) for the determination of the soil fumigants 1,3-dichloropropene (1,3-DCP) and methyl isothiocyanate (MITC) in environmental samples such as soil and water samples has been investigated. Direct immersion SPME followed by GC/ECD/NPD analysis allowed the rapid determination of the two fumigants in water samples, with very little sample manipulation, giving an LOD of 0.5 microg L(-1). Precision, calculated as relative standard deviation (RSD) for six replicates at three concentration levels, was found to be lower than 20% at the concentration levels tested. For the analysis of soil samples, headspace (HS)-SPME combined with GC/ECD/NPD analysis has been applied. Quantification using matrix-matched calibration curves allowed determination of both analytes (MITC and 1-3-DCP) with a LOD of 0.1 microg kg(-1) (RSD < 10%) for the two concentration levels assayed (0.02 and 0.2 mg kg(-1)). The HS-SPME procedure developed in this paper was applied to soil samples from experimental green house plots treated with metham-Na, a soil disinfestation agent that decomposes in soil to MITC. The absence of sample manipulation as well as the low solvent consumption in SPME methodology are among the main advantages of this analytical approach.     

Argeloside A and B, two novel 14,15-secopregnane glycosides from Solenostemma argel

Argeloside A and B, two novel 14,15-secopregnane glycosides characterized by the presence of two hemiketal functions involved in two five-membered rings, were isolated from Solenostemma argel fruits. Their structures have been established by ESIMS and NMR experiments. In particular the relative configuration of the molecules has been defined by combining the available NMR data with quantum chemical calculations of the geometries and ¹³C chemical shifts.     

From pentalene to dicyclopenta[b,g]naphthalene, or the change towards delocalized structures.

Using triples-corrected coupled-cluster methods as well as other high-level theoretical approximations, the optimized parameters and isomerization barriers of the family of compounds cyclopentadiene-(benzene)x-cyclopentadiene (x = 0, 1, 2) are computed. In contrast to previous studies, s-indacene presents a localized C(2h) geometry. Also, the localized structure of pentalene is found to be the most stable, but when two benzene rings are intercalated between the five-member rings of pentalene, the resulting molecule preferably adopts a delocalized D(2h) conformation.     

Simultaneous determination of phenylglycidol enantiomers and cinnamyl alcohol in asymmetric epoxidation processes by chiral liquid chromatography

A high-performance liquid chromatographic method has been developed for the simultaneous determination of phenylglycidol enantiomers and cinnamyl alcohol (CA). Separations were achieved on an amylose tris(3, 5-dymethylphenylcarbamate) chiral stationary phase (Chiralpak AD). The effect of concentration of organic modifier (2-propanol and ethanol) in the mobile phase and flow-rate was studied. The mobile phase selected consisted of a mixture of n-hexane-ethanol (85:15, v/v) with a flow-rate of 1.2 ml/min. The UV-vis detector was set at 254 nm. Resolution for the phenylglycidol enantiomers in the suitable chromatographic conditions was 2.4 with an analysis time of 12 min. The method developed was validated and was found to be linear in the range from 5 x 10(-4) to 3 x 10(-2) M, for phenylglycidol enantiomers and in the range from 5 x 10(-5) to 1 x 10(-3) M, for CA (r > 0.999 for the three compounds). Repeatability and intermediate precision for the three analytes at three different concentrations were below 3.6 and 2.8% R.S.D., respectively. This method has been applied to study the asymmetric epoxidation of CA with titanium(IV) alkoxide compounds as catalysts in order to evaluate their catalytic activity and stereoselectivity of the epoxidation processes.     

Volatile compounds in virgin olive oil: occurrence and their relationship with the quality

The stimulation of the human sensory receptors by volatile compounds present in virgin olive oils gives rise to the sensory attributes that describe its delicate and fragrant aroma. The composition of the volatile compounds and their biogenesis is briefly illustrated. Analytical methodologies for evaluating the volatile fraction and the sensory properties of virgin olive oils are elucidated. Compounds responsible for typical flavours are examined and the influence of the main factors on the composition of volatile compounds is discussed. The origin of off-flavours are also described and the consequent changes of volatile composition and of sensory characteristics are analysed. The relationships between volatile compounds and sensory attributes are discussed.